
The reflow oven turns printed paste and placed components into a finished assembly. A correct profile gives bright fillets, low voiding and repeatable joints; a wrong one gives tombstoning, head-in-pillow, warpage and endless rework.
THOMAO supplies new and refurbished reflow ovens — 6 to 12 zones, air or nitrogen, lead-free capable — for EMS providers, OEM lines and repair centres.
6 and 8 Zone — the general SMT standard. Enough zones for a proper ramp-soak-spike lead-free profile; belt speeds 0.3–1.2 m/min; roughly 200–400 boards per shift. The right start for most small and mid-size lines.
10 and 12 Zone — for high thermal mass: thick boards, large BGAs, metal-backed LED panels, automotive. More zones mean gentler ramps and a longer soak window, preventing warpage and voids.
Air vs Nitrogen — air is simpler and cheaper. Nitrogen reduces oxidation and improves wetting on fine-pitch and lead-free work, at the cost of gas and a generator or dewar. For Class 3 and automotive, it usually pays for itself in yield.
An oven is only as good as its profile. Every machine can ship with a thermocouple profiling kit and, where supported, automatic profile optimisation. Profile each product once, then re-verify after any change to paste, board thickness or loading — a 1.0 mm profile won’t work on a 2.4 mm board.
Heller, BTU, Rehm, Ersa, Vitronics Soltec, DDM Novastar and SMTech — new and refurbished, with profiles, spares and engineering support for discontinued models.
A refurbished oven with new heaters, rebuilt blowers and a documented profile costs 40–60% of new. Bodies and conveyors last decades; heaters and blowers are consumables. For most lines, a well-refurbished 8- or 10-zone platform is the better commercial decision.
How many zones? Six handles most lead-free boards up to 1.6 mm; eight or ten for thick boards, large BGAs, metal-core LED or automotive.
Nitrogen worth it? For fine-pitch, lead-free and Class 3, usually yes. For simple 0603-and-above on a budget, air is fine.
How often to profile? Once per product, then after any change of paste, board thickness, carrier or loading. Keep records — auditors will ask.
Spare heaters and belts? Yes — heaters, blowers, thermocouples, belts and conveyor parts, including discontinued models.
Lead time? Stock ovens 7–15 days; 10–12 zone and nitrogen-ready 4–8 weeks.
Send your board thickness range, largest panel size, paste type, required throughput and nitrogen needs. We’ll recommend two or three matching platforms with a sample profile within one working day.
Showing all 12 results











