Description
Dependable Performance with GLS-E Fully Automatic Solder Paste Printer
The GLS-E Fully Automatic Solder Paste Printer represents the peak of precision, universality, and stability in manufacturing. It is designed by GKG to cater to diverse printing needs while maintaining top-notch performance and cost-effectiveness. Whether you’re working on solder paste, FLUX, silver paste, or even unconventional materials like silica gel and printing ink, the GLS-E handles it all with ease.
Designed for a Wide Range of Applications
From notebooks to communication devices, spaceflight equipment, and household appliances, the GLS-E stands out as a versatile solution. It is uniquely suited for processes involving small spacing, multiple solder joints, and high-quality requirements, making it the ideal choice for projects demanding fine detail and reliability.
Why Choose the GLS-E?
The GLS-E not only supports a variety of printing tasks but also guarantees stability across all operations. Whether you’re dealing with Red RTV Silicone Gasket, glue, or traditional soldering processes, this automatic printer streamlines your workflow and enhances efficiency, meeting even the most intricate demands of modern industries.
| Performance | |
| Repeated Positloning Accuracy | 土12.5um@6o，CPK>2.0 |
| Repeated Printing Precisior | 士22um@60.CPK20 |
| Excluding cleaning and printing | <7.5 sec |
| Including cleaning and printing | 19s/pcs |
| Processing CT | 5min |
| Line Change CT | 3min |
| Laminate Processing Parameters | |
| Maximum Laminate Dimension | 510*510mm |
| Minimum Laminate Dimension | 50*50mm |
| Laminate Thickness | 0.4-6mm |
| Mechanical Range of Canture | 510*510mm |
| Maximum Laminate Weight | 5kg |
| Marginal Gap of Laminate | 2.5mm |
| Height over the Top | 23mm |
| Transmission Heighe | 900±40mm |
| Transmisuion Soeed | Control by section, 1500mm/s (Max) |
| Way of Transmission | One-section transmission guide rail |
| Transmission Direction | From left to right |
| From right to left | |
| Same in and out | |
| Laminate Support Method | Magnetic thimble |
| Spacer blocks of edual height i65mm | |
| Selt adjustable jacking plattoom | |
| Laminate Clamping | Self-retractable upward pressing shee |
| Flexiblesde clamc | |
| Vacuum suction function | |
| Printing Parameters | |
| Printing Speed | 10-200mm/sec |
| Printing Pressure | 0.5-20Kg |
| Printing Mode | Single or double scraper printing |
| Scraoer TyDe | Rubberscraper/steelscraper(angle:45/55/60 |
| Stripper Distance | 0~20mm |
| Stripper Speed | 0~20mm/sec |
| Size of SteelMesh frame | 470*370mm-737*737mm |
| RositioningMethod of Steel Mesh | |
| Cleaning Parameters | |
| Ceaning Method | Dry witing. wet wioing.vacuum |
| High Coeed Clesnins | Back and forth cleaning |
| Cleanint System | Side soray tvpe |
| Cleaning Strcke | Generated automasically based on the lenath and width of the laminato |
| Cleaning Position | Rear |
| Cleanine Soeed | 10-200mm/sec 10-200mm/sec |
| Consumption of Cleaning Fluid | Generated automatically.Manuall adiustable |
| ConsumptonofcleaningPape | Generated automatically.Manuall adiustable |
| Image Parameters | |
| Field ofVision of lmane | 10*8mm |
| Camera Tvoe | 1.3 megapixel dieital camera |
| Image Pickup System | Uo-down imaaing.senless adiustmentollightsource |
| Canture CT | 300ms |
| Type of Datum Point | Datum point of standard shaoes |
| Such as circle, square, thombus, cross | |
| Bonding pad and special-shaped | |
| Mark Size | 0.3.6mm |
| Number of Marks | Max:4pcs |
| erofEcolProaf Points | Max:lpcs |
| Machine Parameters | |
| Power Requirement | AC·220 ￡106.50/60Hz2.2KW |
| Requirement of Compressed Air | 4-6Kgf/cm |
| Gas Consumotion | about5L/min |
| Temperature of Working Emironment | -20°C-+45℃ |
| Humidity of Working Environment | 3096-60% |
| Machine Height jvduding sricalour ligf | 1500(H)mm |
| Machine Langth X Direction | 1258/L1mm |
| Machine Width Y Direction | 1425(Wimm |
| Machine Weigh | Approx:1100Kg |
| Load-bearing Requirement of Equioment | 650ka/md |
Reviews
There are no reviews yet.